RM3090E _58 Vehicle Interior _008429 LIGHTING (INT) _0050307 RELAY G

LIGHTING (INT)  RELAY  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 84270Q 1.INSPECT LIGHT CUT RELAY (for LHD)

a.

Remove the fuse box opening cover.

Click hereVehicle Interior>INTERIOR PANELS / TRIM>LOWER INSTRUMENT PANEL>REMOVAL


b.
E270409

Detach the clamp.


c.
E270410

Remove the light cut relay.


d.
E256070N01
2.281,1.417 2.583,1.323 false 2.813,1.479 3.01,1.438 false 2.792,1.125 2.667,1 false 2.906,0.792 2.667,0.656 false 0.281,1.396 0.438,1.594 0.156,0.198 10 false 1 1.573,1.396 1.729,1.594 0.156,0.198 10 false 2 0.292,0.677 0.448,0.875 0.156,0.198 10 false 3 1.583,0.896 1.74,1.094 0.156,0.198 10 false 5 2.948,0.75 3.104,0.948 0.156,0.198 10 false 3 2.844,1.104 3,1.302 0.156,0.198 10 false 5 2.729,1.427 2.885,1.625 0.156,0.198 10 false 1 2.635,1.229 2.792,1.427 0.156,0.198 10 false 2

Check the resistance.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 5 Battery voltage not applied to terminals 1 and 2 10 kΩ or higher
Battery voltage applied to terminals 1 and 2 Below 1 Ω


If the result is not as specified, replace the light cut relay.



e.

Install the light cut relay.


f.

Install the fuse box opening cover.

Click hereVehicle Interior>INTERIOR PANELS / TRIM>LOWER INSTRUMENT PANEL>INSTALLATION


Hide 84270Q 2.INSPECT LIGHT CUT RELAY (for RHD)

a.

Remove the combination meter assembly.

Click hereVehicle Interior>METER / GAUGE / DISPLAY>COMBINATION METER>REMOVAL


b.
E270411

Remove the light cut relay.


c.
E256070N01
2.281,1.417 2.583,1.323 false 2.813,1.479 3.01,1.438 false 2.792,1.125 2.667,1 false 2.906,0.792 2.667,0.656 false 0.281,1.396 0.438,1.594 0.156,0.198 10 false 1 1.573,1.396 1.729,1.594 0.156,0.198 10 false 2 0.292,0.677 0.448,0.875 0.156,0.198 10 false 3 1.583,0.896 1.74,1.094 0.156,0.198 10 false 5 2.948,0.75 3.104,0.948 0.156,0.198 10 false 3 2.844,1.104 3,1.302 0.156,0.198 10 false 5 2.729,1.427 2.885,1.625 0.156,0.198 10 false 1 2.635,1.229 2.792,1.427 0.156,0.198 10 false 2

Check the resistance.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 5 Battery voltage not applied to terminals 1 and 2 10 kΩ or higher
Battery voltage applied to terminals 1 and 2 Below 1 Ω


If the result is not as specified, replace the light cut relay.



d.

Install the light cut relay.


e.

Install the combination meter assembly.

Click hereVehicle Interior>METER / GAUGE / DISPLAY>COMBINATION METER>INSTALLATION